6FD100 Polyurethane
(Available in Gloss, Satin or Low Sheen)
  Mailing Address:
P.O. Box 1741
Appleton, WI 54913

Description

A fast drying modified urethane that provides excellent hardness, mar and chemical resistance. It also exhibits good flexibility. Adhesion is superior; nontoxic when dry.

Uses
Commercial applications such as gym floors, bowling alleys, etc., where heavy duty wear is anticipated. For bar tops, tables, kitchen cabinets, furniture or woodwork. Stands up well as exterior coating.

Solids % by WT
37

Application

Brush, dip, or spray as supplied or thinned. Thin with V M & P Naphtha to maintain fastest dry time. Mineral spirits will slow dry time slightly.

Solvent

6FD100 - V M & P Naphtha - Rule 66 acceptable

Viscosity
Supplied 35 seconds at 77 degrees F - #4 Ford Cup. Please note: Viscosity will vary depending on the temperature. Do not thin when material is cold as it is possible to over reduce.

Dry & Cure Time
Air dry.
Set to touch: 15 to 25 minutes.
Dry through: 1 1/2 to 2 hours.

Handling Precautions
WARNING: FLAMMABLE LIQUID - HARMFUL OR FATAL IF SWALLOWED - CONTAINS PETROLEUM DISTILLATES.

Keep away from heat, sparks and open flame. Use only with adequate ventilation. Avoid prolonged or repeated contact with skin. Keep closure tight and upright to prevent leakage. Keep container closed when not in use. In case of spillage, absorb and dispose of in accordance with local applicable regulations. FIRST AID: In case of skin contact, flush with plenty of water; for eyes, flush with plenty of water for 15 minutes and get medical attention. If exposed to high concentration of vapor, remove to fresh air. If swallowed, CALL A PHYSICIAN IMMEDIATELY. DO NOT induce vomiting.

FOR INDUSTRIAL USE ONLY - KEEP OUT OF THE REACH OF CHILDREN.

     

 

Plant Address:
2434 Progress Ct.
Neenah, WI 54956
Phone:
(920) 722-8355
Email Us
 
  Site Map: Home -- About Us -- Products -- Contact Us -- Links -- Why Velvit?  
  Copyright 2010 Velvit Products Inc. All Rights Reserved