4296 Water Reducible Sanding Sealer
  Mailing Address:
P.O. Box 1741
Appleton, WI 54913

Description

A wood sanding sealer is a very good quality acrylic emulsion type sealer for wood finishing. Can be applied over most dye and pigmented stains while providing excellent intercoat adhesion between stain and topcoats. Also can be used on most plastic surfaces. Designed for use with 4297, a water reducible topcoat.

Uses
Furniture, kitchen cabinets, picture frames, shelving, toys, mouldings, display cases, water beds, novelties, most plastic surfaces.

Advantages

Water reducible, excellent adhesion, mar and UV resistance, noncombustible. Excellent sanding and good holdout.

Application

Reduce up to 10% with water for conventional or airless spray. Air dry at least 30 minutes before sanding. Force dry -- to sand -- 10-20 minutes at 120 degrees F - 140 degrees F. Remove sand dust, then topcoat.

Product Specifications:
Wt./Gal., Lbs. . . . . . . . . . . . . . . . . 8.5 +/- 0.1
Solids - By Weight, %. . . . . . . . . 31 +/- 0.1
Solids - By Volume, %. . . . . . . . .29 +/- 0.1
Volatile Organic Compound
(VOC) Lbs./Gal. . . . . . . . . . . . . . . 3.27
Viscosity, #4 Ford
@ 77 degrees F, Secs . . . . . . . . 25-30
pH. . . . . . . . . . . . . . . . . . . . . . . . . . 7.8-8.3
Cold Check Cycles,
Min. . . . . . . . . . . . . . . . . . . . . . . . . .10

Handling Precautions
See MSDS. Liquid coating will not support combustion. Sanding dust must be removed before topcoating. Agitate well before using. Stainless steel spray equipment is recommended. Lined steel or plastic is suggested. Protect from freezing.
     

 

Plant Address:
2434 Progress Ct.
Neenah, WI 54956
Phone:
(920) 722-8355
Email Us
 
  Site Map: Home -- About Us -- Products -- Contact Us -- Links -- Why Velvit?  
  Copyright 2010 Velvit Products Inc. All Rights Reserved